Allied Telesis AT-S102 - Manual (Page 184)

Chapter 6: Configuring the Media Converter Line Cards
184
4. Select Auto-copy Line Card Configuration. The following prompt is
displayed.
Figure 73. Auto-copy Line Card Configuration Prompt
5. Select the desired setting for the auto-copy feature for the line card’s
slot. The default setting is disabled. If you enable auto-copy and later
replace this line card with another card of the same model, the new
card will be assigned the same parameter settings as this card.
6. To save your changes in the master configuration file, return to the
Line Card Configuration Menu and select Save Line Card
Configuration.
Web Browser
To set the auto-copy feature from the web browser windows:
1. Select Module Status & Configuration from the menu bar.
2. In the Chassis View, click either of the ports on the AT-CM Line Card
in the slot you want to configure. Alternatively, select the Menu View
tab and click the model name of the line card. You can configure only
one slot at a time.
3. Select the Line Card Configuration tab.
4. If the Auto-copy tab is not selected, select it.
Display Current Configuration
Auto-copy Enable
> Auto-copy Disable
Return to Line Card Confirmation ...