Allied Telesis AT-S102 - Manual (Page 126)

Chapter 5: Configuring the AT-CV5M02 Management Card
126
Dying Gasp has
Occurred on Remote
Line Card n AT-CV1203
AT-CV5000 Report The media converter line card in slot n in
the AT-CV5000 Chassis received the
dying gasp signal from its line card
counterpart in a remote AT-CV1203
Chassis. The remote line card sent the
signal because the AT-CV1203 Chassis
lost power. For background information,
refer to “Dying Gasp and First RPS
Failure Signals” on page 62.
Fan Tray A/B: Fan
Temperature Exceeds
Limit AT-CV5000 Report The temperature of the chassis exceeded
the temperature threshold.
Clear The temperature of the chassis returned
below the temperature threshold.
Fan Tray A/B has
been Installed AT-CV5000 Report The AT-CVFAN Fan Module was installed
in the AT-CV5000 Chassis.
Fan Tray A/B has
been Removed AT-CV5000 Report The AT-CVFAN Fan Module was removed
from the chassis.
Fan Tray Module A/B
Fan n Failed AT-CV5000 Report A cooling fan stopped.
Clear A cooling fan resumed operations.
Line Card n Missing AT-CV1200
AT-CV1203
AT-CV5000 Report The line card in slot n was removed from
the chassis.
Clear The line card removed from slot n was
reinstalled in the slot.
Line Card m Port n
Offline AT-CV1200
AT-CV1203
AT-CV5000 Report Port n on the line card in slot m lost its link
to a network device.
Line Card m Port n
Online AT-CV1200
AT-CV1203
AT-CV5000 Report Port n on the line card in slot m
established a valid link with a network
device.
Line Card n Reboot AT-CV1200
AT-CV1203
AT-CV5000 Report The line card in slot n was rebooted using
the AT-CV5M02 Management Card.
Power Module A/B
has been Installed AT-CV5000 Report The AT-PWR14 or AT-PWR15 Power
Supply Module was installed in the
AT-CV5000 Chassis.
Table 13. General Event Messages
Message Chassis
Classi-
fication
Definition