Allied Telesis AT-S102 - Manual (Page 167)

Converteon Management Software User’s Guide
167
This window is for viewing purposes only. The parameters for the fiber
optic port and the twisted pair port are described in Table 21 on page 171.
The fiber optic port will not display any values for the Negotiation, Duplex,
Speed and MDI/MDIX parameters because these parameters are not
adjustable or in the case of the MDI/MDIX setting do not apply on that type
of port. A twisted pair port will display values for these parameters only if
Auto-Negotiation is disabled and the parameters are set manually. The
OAM settings, which are described in Table 31 on page 255, are displayed
if the line card is set to an OAM operating mode.
Web Browser
To view the current parameter settings of the AT-CM Line Cards from the
web browser windows:
1. Select Module Status & Configuration from the menu bar.
2. In the Chassis View, click either of the ports on the AT-CM Line Card
you want to view. Alternatively, select the Menu View tab and click the
model name of the line card. You can view only one line card at a time.
3. Select the Line Card Configuration tab.
4. Select the Current Configuration tab, shown in Figure 62 on page
168.