Allied Telesis AT-S102 - Manual (Page 308)

Chapter 10: Configuring SNMPv3
308
Tag List The tag or list of tags defined by the Notify Tag parameter in
the corresponding entry in the SNMPv3 Notify Table. The tag
list can be up to 256 alphanumeric characters. Separate
entries with a space, for example:
hwengtag swengtag testengtag
Target Parameters The corresponding Target Parameters name. This value has to
match the name of the corresponding entry in the SNMPv3
Target Parameters Table.
Storage Type The possible values are:
V-Volatile
This selection blocks the management card from saving the
entry in the master configuration file.
N-NonVolatile
This selection allows the management card to save the entry in
the master configuration file when a save command is issued.
Allied Telesis recommends this storage type.
Row Status This parameter appears only when you display the SNMPv3
Target Address Table. The Active value indicates the entry
takes effect immediately.
Table 38. SNMPv3 Target Address Table Parameters
Parameter Description