Allied Telesis AT-S102 - Manual (Page 333)

Converteon Management Software User’s Guide
333
After you’ve made a selection, a confirmation prompt is displayed.
4. Enter Y to proceed with the upload or download, or N to cancel the
procedure.
Download Configuration File
from Management Card Select this option to download the master configuration file to
the management card from the TFTP server. After receiving
the master configuration file from the TFTP server, the card
writes the file to flash memory and resets. Afterwards, it
initializes its management software and configures its
parameters according to the settings in the downloaded
configuration file. To resume managing the card, you have to
start a new management session.
If the auto-copy settings for the chassis slots is activated in
the downloaded configuration file, the settings on the line
cards may change. This may disrupt network operations and
may result in the loss of network traffic. For further
information, refer to “Configuration Files” on page 32.
Upload SNMPv3 Configuration
File from Management Card Select this option to upload the SNMPv3 configuration file
from the management card to the TFTP server. After
uploading the file, the management card displays the
Configuration File Upload/Download with TFTP Menu again.
Download SNMPv3
Configuration File from
Management Card Select this option to download the SNMPv3 configuration file
to the management card from the TFTP server. After
receiving the master configuration file from the TFTP server,
the card writes the file to flash memory and resets.
Afterwards, it initializes its management software and
configures its parameters according to the settings in the
downloaded configuration file. To resume managing the
card, you have to start a new management session.
Table 44. Configuration File Upload/Download with TFTP Menu
Selection Description