Allied Telesis AT-S102 - Manual (Page 164)

Chapter 6: Configuring the Media Converter Line Cards
164
Web Browser
To view the states of the ports on the line cards from the web browser
windows, click Module Status & Configuration in the menu bar. The web
browser windows have a Chassis View and a Menu View. The Chassis
View is an illustration of the front panel of the chassis. The information is
static. To refresh the view, simply click Module Status & Configuration
again.
To view or configure the parameters of the AT-CM Line Cards or the
AT-CV5M02 Management Card, click a port on a card. You can configure
only one card at a time.
Figure 59. Chassis View
The Menu View, shown in Figure 60 on page 165, lists all of the line cards
in the chassis and displays the states of the links of their ports. The
information in this view is automatically refreshed every few seconds. The
columns in the table are described in Table 19 on page 158. To view or
configure the parameters of the line cards or a management card, click in
the CardTypeVer column the model name of the card. You can configure
only one card at a time.
AN This column displays the status of Auto-Negotiation on the twisted
pair ports on the AT-CM Line Cards. The possible states are:
ˆ Y - Auto-Negotiation is enabled on the port. The speed and
duplex mode are set automatically. This is the default setting.
ˆ N - Auto-Negotiation is disabled on the port. The speed and
duplex mode were set manually.
Table 19. Module Status and Configuration Menu
Column Description