Allied Telesis AT-S102 - Manual (Page 182)

Chapter 6: Configuring the Media Converter Line Cards
182
Configuring the Maximum Frame Size on the AT-CM2K0S Line Card
The AT-CM2 Line Cards and the AT-CM70S Line Card can handle
packets up to 1522 bytes. An exception is the AT-CM2K0S Line Card
because it can be configured to handle packets up to 1632 bytes. To
adjust the maximum packet size on the AT-CM2K0S Line Card, perform
either of the following procedures.
Menus
To adjust the maximum packet size on the AT-CM2K0S Line Card from
the menus:
1. From the Main Menu, select Module Status and Configuration. The
Module Status and Configuration Menu is shown in Figure 58 on page
158.
2. Select the AT-CM2K0S Line Card you want to configure. This displays
the Module Configuration Menu for the line card. An example of the
menu is shown in Figure 63 on page 169.
3. From the Module Configuration Menu, select Configure Max Frame
Size to display the Max Frame Size Config Menu shown in Figure 71.
Figure 71. Max Frame Size Config Menu for the AT-CM2K0S Line Card
4. From the Max Frame Size Config Menu, select one of the following
frame sizes:
1522/1518
Allows frames up to 1522 bytes. This is the default value.
1632
Allows frames of up to 1632 bytes.
The line card immediately implements your change.
5. To save your changes in the master configuration file, return to the
Module Configuration Menu and select Line Card Configuration and
Save Line Card Configuration.
Web Browser
This procedure is not supported in the web browser windows.
Max Frame Size Config Menu
Module 14
> Max Frame Size: 1522/1518
Max Frame Size: 1632
Return to Module Configuration Menu ...