Allied Telesis AT-S102 - Manual (Page 174)

Chapter 6: Configuring the Media Converter Line Cards
174
6. To save your changes in the master configuration file, return to the
Module Configuration Menu and select Line Card Configuration and
Save Line Card Configuration.
Web Browser
To configure the parameter settings of the ports on the AT-CM Line Cards
from the web browser windows:
1. Select Module Status & Configuration from the left menu bar.
2. In the Chassis View, click the line card port you want to configure.
Alternatively, select the Menu View tab and click the name of the line
card. You can configure only one line card at a time.
3. Click the Port A tab to configure the fiber optic port on the media
converter line card or the Port B tab to configure the twisted pair port.
You can configure only one port at a time.
Ingress Rate Limit
Egress Rate Limit
(Continued) ˆ For ingress or egress rate limiting from 64 Kbps to 1
Mbps, the value has to be an increment of 64 Kbps (e.g.,
64, 128, etc.).
ˆ For ingress or egress rate limiting from 1 Mbps to 100
Mbps, the value has to be an increment of 1,000 kbps in
the range of 1,000 to 100,000 kbps (e.g., 1000, 2000,
etc.).
ˆ For ingress rate limiting from 100 to 200 Mbps, the value
has to be an increment of 10,000 Kbps in the range of
100,000 to 200,000 kbps (e.g., 110000, 120000, etc.).
The AT-CM3 Line Cards do not support ingress rate
limiting above 200 Mbps.
ˆ For egress rate limiting from 100 Mbps to 1 Gbps, the
value has to be an increment of 10,000 kbps in the range
of 100,000 to 1,000,000 kbps (e.g., 110000, 120000,
etc.).
ˆ To disable ingress or egress filtering, enter the value 0.
Port Statistics For information on this menu option, refer to “Displaying Port
Statistics” on page 203.
Table 21. Port Configuration Menu
Setting Description