Allied Telesis AT-S102 - Manual (Page 240)

Chapter 7: Configuring the Media Converter Line Cards with Remote Peer Management
240
Displaying SFP Module Information from the Remote AT-CM Line
Cards
The procedures in this section are used to view the manufacturer’s
specifications for SFP modules in remote AT-CM2K0S, AT-CM70S and
AT-CM3K0S Line Cards.
Menus
To view the SFP information from the menus:
1. From the Main Menu, select Diagnostics to display the Diagnostics
Menu shown in Figure 53 on page 148.
2. Select Remote CM Line Card Diagnostics.
3. From the Remote CM Line Card Diagnostics Menu, select SFP
Information. The following prompt is displayed:
Enter LineCard Slot Number: ->
4. Enter the slot number of the AT-CM2K0S, AT-CM70S Line Card or
AT-CM3K0S with the SFP module. The following prompt is displayed:
Enter LineCard Port [A or B]: ->
5. Enter the port of the SFP module.
An example of the SFP Information window is shown in Figure 89 on
page 214.
Web Browser
To use the web browser windows to view the SFP information:
1. Select Diagnostics from the menu bar.
2. Select the Remote CM Line Card tab.
3. Select the SFP Information tab.
4. When prompted, select the Slot Number field and enter the slot
number of the local line card connected to the remote card that has the
SFP module you want to view. You can specify only one slot number.
The information for the SFP module acting as port A on the remote line
card is displayed.