Allied Telesis AT-S102 - Manual (Page 196)

Chapter 6: Configuring the Media Converter Line Cards
196
6. At the confirmation prompt, select Yes to restore the settings or No to
cancel the procedure. If you select Yes, the parameter settings on the
card are returned to the last saved configuration. The line card will
reset if its current operating mode is different from the last saved
configuration.
Web Browser
To restore the last saved configuration to an AT-CM3 Line Card from the
web browser windows:
1. Select Module Status & Configuration from the menu bar.
2. In the Chassis View, click either of the ports on the line card you want
to configure. Alternatively, select the Menu View tab and click the
model name of the line card. You can configure only one line card at a
time.
3. Select the Line Card Configuration tab.
4. To restore the previous configuration to the line card, select the Last
Saved Configuration tab, shown in Figure 82.