Chapter 6, Configuring the media converter line cards – Allied Telesis AT-S102 User Manual
Page 157

157
Chapter 6
Configuring the Media Converter Line
Cards
This chapter has the following sections:
“Displaying the Status of the Line Cards” on page 158
“Displaying the Parameter Settings of the AT-CM Line Cards” on
page 166
“Configuring the Port Parameters on the AT-CM Line Cards” on
page 169
“Setting the Operating Mode” on page 176
“Assigning Names to the AT-CM Line Cards” on page 181
“Configuring the Maximum Frame Size on the AT-CM2K0S Line Card”
on page 182
“Setting the Auto-copy Feature” on page 183
“Setting the Low Power Mode on the AT-CM3 Line Cards” on page 186
“Setting the Low Power Mode on all the AT-CM3 Line Cards” on
page 188
“Restoring the Default Settings” on page 191
“Restoring the Last Saved Configurations to the AT-CM3 Line Cards”
on page 195
“Resetting an AT-CM3 Line Card” on page 198
“Resetting All of the AT-CM2, AT-CM3, and AT-CM70S Media
Converter Line Cards” on page 199
“Resetting All of the AT-CM, AT-CM70S, and AT-CV Media Converter
Line Cards” on page 201
“Displaying Port Statistics” on page 203
“Displaying the Version Numbers of the Management Software” on
page 207
“Displaying the MAC Addresses and Serial Numbers” on page 210