Allied Telesis AT-S102 - Manual (Page 189)

Converteon Management Software User’s Guide
189
4. To activate the low power mode on all the AT-CM3 Line Cards and to
turn off the LEDs, select Set All CM Line Cards to Low Power Mode.
To disable the mode and turn on the LEDs, select Return All CM Line
Cards to Normal Mode.
5. To view the current low power mode settings of the line cards, select
Display Low Power Mode for All CM Line Cards. An example of the
window is shown in Figure 78. If the LPM setting for a line card is ON,
than the low power mode is active and the LEDs are off. If the setting is
off, the default setting, the low power mode is off and the LEDs are on.
Figure 78. Line Card Low Power Mode Information
6. To save your changes in the master configuration file on the
management card, return to the All CM Line Card Configurations Menu
and select Save All CM Line Card Configurations.
Web Browser
To set the local power mode on all of the AT-CM3 Line Cards from the web
browser windows:
1. Select Configuration from the menu bar.
2. Select the All CM Line Cards tab.
Figure 79. All CM Line Card Tab
Line Card Low Power Mode Information
Module LPM
1 -------- AT-CV5M02 --
2 Reg11 AT-CM301 ON
3 Reg20 AT-CM301 ON
4 Reg20 AT-CM301 ON
5 Reg20 AT-CM301 ON