Allied Telesis AT-S102 - Manual (Page 264)

Chapter 9: Configuring the Operations, Administration, and Maintenance Client
264
Displaying OAM Information on Local OAM Clients
The procedures in this section explain how to view the OAM status
information on the OAM clients on the local line cards.
Menus
To display status information on the local OAM clients from the menus:
1. From the Main Menu, select Module Status and Configuration to
display the Remote Module Status and Configuration Menu. An
example of the menu is shown in Figure 58 on page 158.
2. Select the local line card whose OAM information you want to view.
This displays the Module Configuration Menu for the line card. An
example is shown in Figure 63 on page 169.
3. Select Port A to display the Port Management Menu shown in Figure
64 on page 170. OAM is only supported on port A of the line cards.
4. From the Port Management Menu, select OAM Configurations to
display the OAM Configuration Menu, An example of the menu is
shown in Figure 105 on page 254.
5. From the OAM Configuration Menu, select the Show Local OAM
Information window to display the Show Local OAM Information
Menu, shown in Figure 112 on page 265.