Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 43)

Hardware Preparation and Installation
ARTM-831X Installation and Use (6806800M76E) 43
5. Apply equal and steady pressure to the RTM to carefully slide the RTM into the shelf
until you feel resistance. Continue to gently push the RTM until the RTM connectors
engage.
6. Squeeze the lever and the latch together and hook the lower and the upper handle
into the shelf rail recesses.
7. Fully insert the RTM and lock it to the shelf by pressing the two components of the
lower and the upper handles together and turning the handles toward the face
plate.
8. Tighten both face plate screws on the RTM.
9. Wait until the blue LED on the RTM is OFF.
A switched off blue LED indicates that the payload of the RTM has become active.
10.Plug interface cable into face plate connectors, if applicable.