Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 35)

Introduction
ARTM-831X Installation and Use (6806800M76E) 35
1.4 Mechanical Data
The following table provides details about the blade's mechanical data, such as dimensions and
weight.
1.5 Ordering Information
The following table lists the product variants and accessories that were available as of the time
of writing this manual. Consult your local Artesyn sales representative for the availability of
further variants.
Table 1-4 Mechanical Data
Feature Value
Dimensions 70 mm x 322 mm
Weight 609g
Table 1-5 Ordering Numbers
Product Number Description
ARTM-831x-IP Based on the ARTM-831X_base PCA, provides IP only
connectivity and synchronous Ethernet.
ARTM-831x-DS1x Stacked PCA assembly, using the ARTM-831X_base and
the ARTM-831X_E1/T1 unit. It provides up to 48 E1/T1 ports,
the TSI unit and clock synchronization features
ARTM-831x-DS1DS3 Stacked PCA assembly, using the ARTM-831X_base and
the ARTM-831X_DS3/OC3, configured for T3/E3/DS3 I/O
ARTM-831x-DS1OC3 Stacked PCA assembly, using the ARTM-831X_base and
the ARTM-831X_DS3/OC3, configured OC3 I/O
connectivity.