Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 304)

EXT FPGA
ARTM-831X Installation and Use (6806800M76E) 304
The module type and functional revision of the module the Fpga is upon. The value is
determined by pull-up/pulldown resistors.
10.4.2.1.5 Component Event Status Register
Address:
0x10, CompEvtReg
Width: 8 bit
Bit Acronym Type Description Default Pwr Soft
31...8 - - reserved undef - -
7...4 ModuleType R The module type of the module
the Fpga is upon.
0b0000: E1T1, the module is an
E1T1 type
0b0001: Ds3, the module is a
Ds3 type
0b0010: Oc3, the module is a
Oc3 type
0b0011: Ds3Oc3, the module is
a combined Ds3 Oc3 type
0brrrr: reserved const - -
3...0 ModuleFunctionalRev R The module functional revision
of the module the Fpga is upon
(e.g. to adapt the FPGA pinout
to a successor module revision
where the pinout has to be
changed)
0b0000: Initial, Initial functional
revision const - -