Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 305)

EXT FPGA
ARTM-831X Installation and Use (6806800M76E) 305
This register monitors the internal components, eg. Xrt86 framer interrupt status and alarm
pins. If an interrupt occurs, the respective bit is set. It can be reset by writing the respective bit
in CompEvtReg.
10.4.2.1.6 Component Event Status Reset Register
Address:
0x14, CompEvtResReg
Width: 8 bit
Bit Acronym Type Description Default Pwr Soft
7...5 - - reserved undef - -
4 Xrt86FramerAlrm R 0b1: Xrt86FramerAlrm,
reports alarm indicator from
the Xrt86 bits framer 0b0 F F
3 Xrt75LiuAlrm3 R 0b1: Xrt75LiuAlrm3, reports
interrupt from the Xrt75 Liu 3 0b0 F F
2 Xrt75LiuAlrm2 R 0b1: Xrt75LiuAlrm2, reports
interrupt from the Xrt75 Liu 2 0b0 F F
1 Xrt75LiuAlrm1 R 0b1: Xrt75LiuAlrm1, reports
interrupt from the Xrt75 Liu 1 0b0 F F
0 Xrt75LiuAlrm0 R 0b1: Xrt75LiuAlrm0, reports
interrupt from the Xrt75 Liu 0 0b0 F F