Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 17)

ARTM-831X Installation and Use (6806800M76E) 17
About this Manual
Overview of Contents
This manual is intended for users qualified in electronics or electrical engineering. Users must
have a working understanding of Peripheral Component Interconnect (PCI), AdvancedTCA®,
and telecommunications.
The manual contains the following chapters and appendices:
 About this Manual on page 17 lists all conventions and abbreviations used in this manual
and outlines the revision history.
 Introduction on page 27 describes the main features of the blade.
 Hardware Preparation and Installation on page 37 outlines the installation requirements,
hardware accessories, switch settings, installation and removal procedures.
 Controls, LEDs, and Connectors on page 53 describes external interfaces of the blade. This
includes connectors and LEDs.
 Module Management Controller on page 95 , describes the module management controller.
 FRU Information and SDR Summary on page 103 provides information on the blade’s FRU
information and a summary of the sensor data records.
 Sensor Data Records on page 109 lists in detail the sensor data records.
 Related Documentation on page 335 provides links to further blade-related
documentation.
 Safety Notes on page 337 lists safety notes applicable to the blade.
 Sicherheitshinweise on page 341 provides the German translation of the safety notes
section.