Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 340)

ARTM-831X Installation and Use (6806800M76E)
Safety Notes
340
SFP Modules
Personal Injury and Damage of the RTM and SFP Modules
Installing and using SFP modules which are not fully certified and which do not meet all
relevant safety standards may damage the RTM and the SFP modules and may lead to personal
injury.
Only use and install SFP modules which are fully certified and which meet all relevant safety
standards.
Personal Injury
Optical SFP modules may be classified as laser products. When installing and using any of these
SFP modules, the regulations which correspond to the respective laser class apply to the whole
RTM. Not complying to these regulations may lead to personal injury.
When installing and using optical SFP modules which are classified as laser products, make
sure to comply to the respective regulations.
Eye Damage
Optical SFP modules may emit laser radiation when no cable is connected. This laser radiation
is harmful to your eyes.
Do not look into the optical lens at any time.
SFP Module Damage
The optical port plug protects the optical fibres against dirt and damage. Dirt and damage can
render the SFP module inoperable.
Only remove the optical plug when you are ready to connect a cable to the SFP module. When
no cable is connected, cover the port with an optical port plug.