Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 330)

EXT FPGA
ARTM-831X Installation and Use (6806800M76E) 330
Allows to simulate several faults initiated not by the original source but by the host SW for test
purposes.
10.4.2.3.2 ScratchPad Register
Address:
0xA4, ScratchPadReg
Width: 32 bit
Registermemory without any control or status function.
10.4.2.3.3 Test Mode Control Register
Address:
0xA8, TestModeCtrlReg
Width: 8 bit
Bit Acronym Type Description Default Pwr Soft
31...8 FltInsMgckNmb W Magic number to allow write execution
0xFAAFA5: FltInsMgckNmb, Magic
number, faults in bits 7:0 of this register
are only provoked if this bits are written
simultaneously with this value 0x0 X X
7...1 - - reserved undef - -
0 SoftErrorPrvk W Provoke soft error
0b1: SoftErrorPrvk, A soft error of the
Fpga internal configuration SRAM
(monitored continuously for CRC
checks in background by HW) is faked. 0b0 X X
Bit Acronym Type Description Default Pwr Soft
31...0 ScratchPadData RW Scratch Pad Data 0b0 X X