Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 105)

FRU Information and SDR Summary
ARTM-831X Installation and Use (6806800M76E) 105
6.2 Power Configuration
6.3 Sensor Data Records
This section provides a description of all analog and discrete Sensors available at the ARTM-
831X.
6.3.1 SFP Device Inserted Sensors
There is a digital discrete generic device inserted sensor implemented for each SFP inserted.
Table 6-4 Power Configuration
Item Value Description
Dynamic power reconfiguration
support No While the RTM is powered, it supports only one power
level.
Dynamic power configuration No The power level is fixed and does not change)
Number of power draw levels 1 The amount of possible power levels
Early Power Draw Levels, Watt - Complete early power level including MMC
Steady state Power Draw Levels,
Watt ? Complete steady power consumption including IPMC
and RTM
Transition from early to steady
levels, sec 0s -
Table 6-5 SFP Device Inserted Sensor
Feature Raw Value Description
Entity ID 0xC0 PICMG Rear Transition Board
Entity Instance 0x60 -
Sensor Type 0x15/0x1A Board/Other FRU
Event Reading Type 0x08 Digital Discrete (generic)
Assertion Event Mask (Byte 15) 0x03 -