Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 836)

L-force | PLC Designer
General Editors
834 DMS 4.1 EN 03/2011 TD29

- Toggle a Variable
Abb. 453 Input Configuration, Toggle a Variable
Enter a boolean project variable, the value of which should be toggled between TRUE
and FALSE by the mouse action. Example: "plc_prg.switch1".
Each mouse-input which has got assigned any action via the Input Configuration
dialog, will get the property "Configured" in the Properties table.
Scrollbar specific entries (only for Scrollbar: Input Variable, Output Variable,
Minimum value, Maximum value)
Input Variable variable whose actual value determines the position of the actuator Sc
Output Variable variable whose value is determined by positioning the actuator Sc
Minimum value value corresponding to the most left position (horizontal scrollbar) resp. to the
top position (vertical scrollbar) of the actuator Sc
Maximum value value corresponding to the most right position (horizontal scrollbar) resp. to the
lowest position (vertical scrollbar) of the actuator
Sc
Defining color values:
A color is defined by a hex number which is composed of the Blue/Green/Red (RGB)
components.
For each color value 256 (0-255) colors are available.
FF Blue component
00 Green component
FF Red component
Example: 16# FF 00 FF