Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 332)

L-force | PLC Designer
Menu Commands sorted by Categories
330 DMS 4.1 EN 03/2011 TD29

The archive may contain other than the project files that have been added explicitly.
After a click on Additional files... there will pop up the following dialog box:
Abb. 139 Additional files dialog
where a complete list of the additional files is displayed. By default, an additional file
will not be extracted together with the project files (see the remark
to the right of the file name). If you want an additional file to be extracted, you have to
select it by a click on its name. Afterwards you have to choose one of the three options
provided below:
• Extract to the project folder will extract the selected file to the same directory as
the project files (specified by the path). The remark to the right of the file name will
be changed into .
• Extract to that folder: will extract the file to the folder that you can specify either
by typing the corresponding path into the text field or by making use of the
standard dialog for browsing after a click on . The remark to the right of the
file name will be changed to the specified path.
• Do not extract. will reset the selected file to the default mode.
After adjusting the extract properties of the additional files you may exit the
Additional file dialog pressing OK.
A click on Show comment... will display the comment eventually given on the archived
project by its author. If no comment is contained in the archive, a corresponding error
message will be displayed instead.