Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 282)

L-force | PLC Designer
Menu Commands sorted by Categories
280 DMS 4.1 EN 03/2011 TD29

12.12.4 Change Device Name...
This command (category Device Communication) opens the same-named dialog for
changing the (Current) name of the device as used in the configuration tree in the
Communication Settings dialog. The new name can be entered manually in the field
behind New:., or the standard option "" (name of the device as used in
the device tree of the project) can be chosen from the selection list.
Abb. 103 "Change device name" dialog
12.12.5 Connect to local Gateway...
This command (category Device Communication), for which there is also a button in
the Communication Settings dialog of the device editor, will open a dialog containing
two tabs that assist with configuring a local gateway and therefore provide an
alternative to manual editing the file "Gateway.cfg".
Attention: The proper configuration of the gateway requires detailed knowledge. In
case of doubt leave unchanged the default configuration settings!