Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 326)

L-force | PLC Designer
Menu Commands sorted by Categories
324 DMS 4.1 EN 03/2011 TD29

The originally used device is indicated and you have to decide what should happen
with that device reference in the new project. Choose one of the following options:
Use the following device that has already been installed: The Browse button opens the
dialog 'Select Target Device', where you can choose one of the devices currently
installed on the local system. This device then will be inserted instead of the old one in
the devices tree of the new project.
Abb. 133 Dialog 'Select Target Device'
Activate option Select a target device... in order to be able to choose one of the listed
device entries. The usage of the dialog (sorting by vendor and categories) corresponds
to that of the device repository dialog.
Ignore the device. All application specific objects will not be available in the new
project.: In this case the device tree in the new project will not get an corresponding
device entry at all and application specific objects like for example the Task
configuration will not be transferred as well.