Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 328)

L-force | PLC Designer
Menu Commands sorted by Categories
326 DMS 4.1 EN 03/2011 TD29

Save Project
Symbol:
Default Shortcut +
Batch command: file save (not yet implemented)
This command (category 'File') is used to save the project at the currently defined
location. It is only available if any modifications have been done in the project since
the last saving. This is indicated by an asterisk behind the project name in the title bar.
Abb. 135 Title bar, modified project
In case the project is write-protected the following message dialog will be opened:
Abb. 136 Message dialog, project write-protected
Save As.. allows to define a new project path.
Overwrite removes the write protection from the project file and saves the project.
Backup file:
Optionally a project backup file can be kept. If option Create backup files is activated in
the options dialog for 'Load and Save', at each saving the project will be copied to a file
Projectname.backup additionally to getting saved to Projectname.project.