Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 325)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 323
In the converted project the library references will be available in a global Library
Manager in the POUs window.
After having finished the library reference conversion, the project conversion will
continue with the dialog 'Open Project' as described above.
• If a V2.3 project is opened which includes a device setting, for which not yet a
"conversion mapping" is defined in the »PLC Designer« 2.3 Converter options, the
dialog 'Device Conversion' will open, where you can define whether and how to
replace the old device definitions by currently valid ones:
Abb. 132 Dialog 'Device Conversion'
(For general information on devices please see Device, Device Tree)