Maple Systems MAPware-7000 - Manual (Page 96)

96 MAPware-7000 Programming Manual
1010-1040, Rev. 02
a. Name – this is the name assigned to the selected screen. The text entered for
the name appears as the title for the screen in the Projects Information window.
By default, the name is simply Screen1, Screen2, etc. However, you may wish to
assign a new name that helps define the purpose of the screen, (i.e. numeric
keypad).
b. Number – this is the number assigned to the screen. A number assigns to each
screen when created. By default, the number assigned is the next available
number in sequence but you can edit this field to assign a new number. Range is
1 to 49999.
3. Screen Properties –
a. Bookmark – option to assign a bookmark to this screen. For more information
on using bookmarks, see Chapter 2 – Software Tour.
b. Description – Enter text to help describe the purpose of this screen. Note: this
text is not downloaded to the HMC.
c. No. of Characters To Print – if this screen is configured to print to a serial
printer, this value determines how many of the characters displayed on the
screen will be sent to the serial printer. Note: maximum is 1590 characters
(using smallest font). If there is more text on the target screen than the value
entered, then only the specified number of characters prints, beginning with
text at the top of the screen.
d. Password – user can protect access to the selected screen by assigning a
numeric password. Range is 0 to 9999 (0 is no password assigned). When
password-protected, a request to display the target screen causes a dialog box
to appear, asking user to enter correct password:
If correct, screen displays.
e. Screen Columns - determines the total number of characters (columns) in each
row that print.
f. Screen Memory Status – this indicates the total amount of memory required (in
bytes) for selected screen. Click on the button to display a more detailed
description of the memory used: