Maple Systems MAPware-7000 - Manual (Page 50)

50 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Reset Bit Places a button on screen that, when pressed, resets or
clears a coil/bit in a PLC or internal memory
Toggle Bit Places a button on screen that, when pressed, alternates
between setting and clearing a coil/bit in a PLC or internal
memory
Word Action Buttons Buttons that write to registers
Write Value to Tag Places a button on screen that, when pressed, writes a
constant value to a register in a PLC or internal memory
Add Value to Tag Places a button on screen that, when pressed, adds a value
to a register in a PLC or internal memory
Subtract Value
from Tag Places a button on screen that, when pressed, subtracts a
value from a register in a PLC or internal memory
Add Tag B to
Tag A
Places a button on screen that, when pressed, reads the
current value in Tag B register and adds this from the value
located in the Tag A register
Subtract Tag B
from Tag A Places a button on screen that, when pressed, reads the
current value in Tag B register and subtracts this to the
value located in the Tag A register
Recipe Buttons Buttons used for recipes
Transfer Recipe Places a button on screen that, when pressed, writes
values from a set of registers in the HMC or PLC to a set of
registers in the PLC.
Upload Recipe Places a button on screen that, when pressed, writes
values from a set of registers in the PLC to a set of registers
in the HMC.
More Advanced Objects Trends, bargraphs, meters, keypad, etc.
Multi-Task Single-
State Button Places a button on screen that can perform multiple tasks
when the button is pressed, pressed and held, and/or
released.
Multi-Task Multi-
State Button Places a button on screen that can perform multiple tasks
when the button is pressed, pressed and held, and/or
released. These tasks are arranged in one or more states.
The word button acts as a ‘jog’ button in that every time it
is pressed, it will advance to the next preconfigured state.