Maple Systems MAPware-7000 - Manual (Page 335)

MAPware-7000 Programming Manual 335
1010-1040, Rev. 02

System Information button – this screen provides hardware information on the HMC,
including bootblock version and firmware version.

Exit button – press this button to exit the System Setup menus. Unit will reinitialize and
display the Halt mode screen:
Simply press the F2 function key to run the installed project or recycle power to the
HMC7000. For more information on the Halt mode screen, see HMC7000 HALT mode
screen section earlier in this chapter.