Maple Systems MAPware-7000 - Manual (Page 246)

246 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Click the Print Preview button to see how your printout will look:
Print Format when using all other logging modes except Logging with Run Time Frequency:
The print feature is available for all other modes of Data Logging (i.e. Power Up, Start/Stop Time,
etc.) but is limited to a few options when formatting the printout:
As you can see from the picture above, most of the options available when using Logging with
Run Time Frequency mode are not available. However, you can still select which tags you wish
to print and you can highlight each tag as above, so that you can create a heading, change the
width, display format, and data type.