Maple Systems MAPware-7000 - Manual (Page 38)

38 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Tools menu – these miscellaneous settings and tools are available with the MAPware-7000
software.

Application Memory Status… - display the Memory Status dialog box. This provides
detailed information on memory required by the HMC7000 for the currently opened
project.

Display Logged Data… - displays logged data (in CSV format) that has been uploaded
from the HMC7000. Logged data can be captured by the HMC7000 using the Data
Logger feature.

Display Historical Alarm Data… - displays data collected by the HMC7000 on alarms

Convert Application – allow programmer to convert a project using one HMC7000 to a
different model of the HMC7000 as long as they both have the same size display

Preferences- miscellaneous settings when using MAPware-7000
o Colors – displays the Color Settings dialog box. These are color options when
using the Logic Block feature
o On line communication – determines which port on the HMC7000 is used during
an online connection – USB, serial, or Ethernet
o Others – set the following

Ladder instruction tag length – determines maximum number of
characters shown for each tag address in the ladder logic

Show default tag name definition screen – if enabled, a popup dialog
box will appear when entering instructions in a logic block It gives
programmer ability to change the name of the tag easily.

Show overlapping message screen – during compile, if MAPware-7000
detects that two adjacent objects are overlapping, a message is
displayed
Data Window menu – this menu is for the Data Window feature.

New block – displays the Define Block dialog box. Use to define a block of data viewed
in the Data Monitor.

Delete block – displays the Delete Block dialog box. Select which block of data you wish
to remove from the Data Monitor.

Edit block – displays the Edit Block dialog box. Use to modify an existing block (i.e.
change address, size, color, etc.).

Import Data – import a Data Monitor file (in *.CSV format) that was created in a
different project. Useful if you wish to monitor the same addresses

Export Data – export a Data Monitor file (in *.CSV format) so that you do not have to
recreate the Data Monitor list in another project
Window menu – MAPware-7000 provides many options for displaying open screens

Cascade – cascades (overlapping windows) all open screens

Tile Horizontally – displays all open screens horizontally (top to bottom of monitor)

Tile Vertically – displays all open screens vertically (left to right of monitor)

Close All – closes all open screens

List of Open Screens – displays a popup dialog box of all open screens