Maple Systems Windows Embedded CE 6.0 Pro Edition - Manual

Introduction
Thank you for purchasing a Maple Systems OMI5000 Series Open HMI
This booklet describes the steps necessary for installing the OMI5000
Series touchscreens.
For information on configuring the OMI, please refer to the OMI5000
Series Operations Manual (Windows CE Embedded 6.0 Professional
Edition) [Maple P/N 1010-1016] available for download at
www.maplesystems.com. For additional information, please refer to the
Support Center on the website. The Support Center provides links to
manuals, FAQs, technical notes, training videos, sample projects,
controller information sheets, and controller cables.
Static Awareness
Do NOT remove the rear cover of your OMI5000 Series product – doing
so will void your warranty. When the rear cover is removed the circuitry
inside is exposed to possible damage by electrostatic discharge during
handling. Minimize the possibility of electrostatic discharge by:

Discharging personal static by grounding yourself prior to
handling the OMI.

Handling the OMI at a static-free grounded workstation.

Connecting the frame ground ( ) connector of the OMI to a
clean earth ground.

Placing the OMI in an antistatic bag during transport.
OPEN HMI
OMI5000 Series
(Windows Embedded CE 6.0 Pro Edition)
Installation Guide