Maple Systems HMI5000L Series User Manual
Hmi5000l series, Installation guide
1010-1018 Rev 01 02/07/2014
Introduction
Thank you for purchasing a Maple Systems HMI5000L Series graphic
industrial operator interface terminal. The HMI5000L Series
touchscreens are configured using the EZwarePlus software (purchased
separately) and include the following models: HMI5043L, HMI5070L,
HMI5070NL, HMI5100L, HMI5121XL, and HMI5150XL. This booklet
describes the steps necessary for installing the HMI5000L Series
touchscreens.
For information on programming and configuring the HMI, please refer
to the EZwarePlus Programming Manual available on the EZwarePlus
software CD. For additional information, please refer to the Support
Center section on our websit
he Support
Center provides links to manuals, FAQs, technical notes, training videos,
sample projects, controller information sheets, and controller cables.
HMI5000L Series
Installation Guide