Maple Systems MAPware-7000 - Manual (Page 145)

MAPware-7000 Programming Manual 145
1010-1040, Rev. 02
Place a Reset Bit button object on screen
1. Use one of the following:
a. click Draw…Buttons…Bit Action…Reset Bit from the standard menu
b. click Quick Buttons…Reset Bit from the Draw toolbar
c. click on the Reset Bit icon in the Objects toolbar
2. Move cursor to a start point for the button object. Click and hold mouse cursor.
3. Drag mouse cursor to an end point for the button object and release. The button
appears on screen and the Reset Bit Properties box displays.
Reset Bit Properties Options

Language (List J) - highlight the language that must be selected to display the entered
text.

Appearance Feedback Tag On/Off (List L) – select the On and/or Off labels

Button Style (List M) – selects a style or ‘look’ to the button

Feedback Tag (List N) – enable this feature and select the same tag for both the target
address and the feedback tag address, if you wish to see the button change state (i.e. go
from an ‘off’ or untouched look to an ‘on’ or touched look)

Simulation (List Nc) – select ‘On/Off’ to see how button looks in that state (only
available if Feedback Tag is set to ‘Yes’)

Task (List O) - turn Bit Off (cannot be modified)

Design (List S) - identifies object

Layout (List T) – coordinates (i.e. size and position) for the object

Tag Properties (List Q) – address of target to use

Tag Address (List Qa) – this is the address of the target bit/coil that is reset

Tag Name (List Qb) – name assigned in the tag database to the target bit/coil