Maple Systems OMI5100A-CE - Manual

1010-1013 Rev 01 www.maplesystems.com
Introduction
Thank you for purchasing a Maple Systems OMI5000 Series Open HMI
This booklet describes the steps necessary for installing the OMI5000
Series touchscreens.
For information on configuring the OMI, please refer to the OMI5000
Series Programming Manual available for download in the Drivers and
Tools section of the Support Center section on our website,
www.maplesystems.com . The Support Center also provides links to
manuals, FAQs, technical notes, training videos, sample projects,
controller information sheets, and controller cables.
Static Awareness
Do NOT remove the rear cover of your OMI5000 Series product – doing
so will void your warranty. When the rear cover is removed the circuitry
inside is exposed to possible damage by electrostatic discharge during
handling. Minimize the possibility of electrostatic discharge by:

Discharging personal static by grounding yourself prior to
handling the OMI.

Handling the OMI at a static-free grounded workstation.

Connecting the frame ground ( ) connector of the OMI to a
clean earth ground.

Placing the OMI in an antistatic bag during transport.
OPEN HMI
OMI5000 Series
(OMI5070A-CE, OMI5100A-CE)
Installation Guide