Maple Systems MAPware-7000 - Manual (Page 238)

238 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Touchscreen Tasks

Alarm Acknowledge button: use this button to acknowledge the topmost alarm
currently displayed in the Alarm List. This button will only work if the following
conditions are met:
o The Acknowledge All feature (see Project Configuration dialog box under the
Alarm tab, Auto Acknowledge option) is not set.
o The selectable Acknowledge bit is not enabled for each alarm.

Acknowledge All button: same as above except that, when pressed, this button
acknowledges all of the currently active alarms. Note: Same conditions as above apply.

Next Alarm button: when pressed, this button advances (move all alarms up one line)
the list of alarms displayed. This is similar to pressing the Down Arrow on the Vertical
Scroll bar when enabled. Note: only works with Alarm List object that is configured as
Alarm Type- Real.

Previous Alarm button: when pressed, this button recedes (move all alarms down one
line) the list of alarms displayed. This is similar to pressing the Up Arrow on the Vertical
Scroll bar when enabled. Note: only works with Alarm List object that is configured as
Alarm Type- Real.