Maple Systems MAPware-7000 - Manual (Page 229)

MAPware-7000 Programming Manual 229
1010-1040, Rev. 02
We have configured this alarm display with a black background and text colors of green, red,
and yellow to indicate the active acknowledged, active not acknowledged, and inactive states
respectively. We will display the alarm text, an alarm number, and acknowledge indicator for
each alarm message displayed. Notice that on the Alarm Display Text Browser, you can
rearrange the fields displayed by highlighting a field (in the right-hand column) and clicking the
Move Up/Move Down buttons.
When using the run time simulator in MAPware-7000, the following screen is displayed:
No alarms are currently active; therefore, the alarm display is blank.
We will activate Alarm#1 by pressing the R5_0 button:
The message appears on the display (in red) along with an assigned alarm number (000) and text
indicating that this alarm has not been acknowledged yet (NO).
The operator presses the %M10 button which has been configured to acknowledge the alarm: