Maple Systems MAPware-7000 - Manual (Page 260)

260 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Description: Use this task to begin or stop logging data for all data groups configured as
Logging Mode: Key Task in the Data Logger
Key’s Specific
Task:
Start/Stop
Logger of
Group #
Key Tasks (Global or Screen-Dependent)
And Multi-Task Buttons
Press task
Released task
# = 1-4
Description: Use this task to begin or stop logging data for a specific data group
configured as Logging Mode: Key Task in the Data Logger
Key’s Specific
Task:
Clear Log
Memory
Key Tasks (Global or Screen-Dependent)
And Multi-Task Buttons
Press task
Released task
NA
Description: Use this task to clear all internal memory of the HMC7000 which is allocated
for the Data Logger.
Key’s Specific
Task:
Start/Stop
Printing of
Group A with
Port B
Key Tasks (Global or Screen-Dependent)
And Multi-Task Buttons
Press task
Released task
A = 1-4 (data group)
B = 1-2 (serial com port)
Description: Use this task to begin or stop printing data for a specific data group to a
connected serial printer