Maple Systems MAPware-7000 - Manual (Page 29)

MAPware-7000 Programming Manual 29
1010-1040, Rev. 02
Starting the MAPware-7000 Software
Open the MAPware-7000 software by clicking on the Start button in the Windows Task bar, then
the All Programs button:
The MAPware-7000 Task menu provides the following:

MAPware-7000 icon to start the software

Help icon to access the Help files directly

The HMC7000 Series Programming Manual

Uninstall icon
Click on the MAPware-7000 icon to begin execution of this program (depending upon the
hardware of your computer, this may take some time). Eventually the opening screen appears:
Note: the software requires that you set your monitor resolution to 1024x768 pixels or higher.
If you have prior experience programming HMIs, you will notice that the MAPware-7000
software is intentionally designed with the same look and feel as most HMI configuration
software in the marketplace today. This is done to make your transition to using the HMC7000
Series products as trouble-free as possible. If you are new to using the MAPware-7000
configuration software, this chapter will give you a brief rundown of how to take maximum
advantage of the ease-of-use this software provides.