Maple Systems MAPware-7000 - Manual (Page 49)

MAPware-7000 Programming Manual 49
1010-1040, Rev. 02
Show Data section Display data as a number or representing with text
Numeric Display Represents data from an internal memory or PLC register
as a number.
Message Display Represents data from an internal memory or PLC register
as predefined text messages.
Bit Display Represents data from an internal bit or PLC bit/coil as two
predefined text messages, one for the On state and one for
the Off state.
Edit Data section Write values to bits and registers using a keypad
Bit Entry This is an input object that, when touched, displays a
popup keypad, that allows operator to change the state
(On/Off) of a targeted bit/coil.
Numeric Entry This is an input object that, when touched, displays a
popup keypad, that allows operator to change the value of
a targeted register in internal memory or the PLC.
Advanced Objects section Represent objects with graphics (i.e. meter, trend,
bargraph, etc). Also contains all objects listed in Quick
Buttons section
Buttons section All button objects listed in Quick Buttons section
Navigation Buttons Screen buttons
Go to Screen Places a button on screen that, when pressed, displays a
base screen
Go to Next Screen Places a button on screen that, when pressed, displays the
next base screen (in numerical order)
Go to Previous
Screen Places a button on screen that, when pressed, displays the
prior base screen (in numerical order)
Open Popup
Screen Places a button on screen that, when pressed, displays a
popup screen that is overlaid on the base screen
Bit Action Buttons Buttons that write to bits
Set Bit Places a button on screen that, when pressed, sets a
coil/bit in a PLC or internal memory