Maple Systems MAPware-7000 - Manual (Page 52)

52 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Alarm buttons section Various buttons for alarms
Alarm
Acknowledge Places a button on screen that is used by the HMC
operator to acknowledge an active alarm.
Acknowledge All Places a button on screen that is used by the HMC
operator to acknowledge all active alarms.
Next Alarm Places a button on screen that is used by the HMC
operator to highlight the next active alarm.
Previous Alarm Places a button on screen that is used by the HMC
operator to highlight the prior active alarm.
Common Objects Toolbar – this vertical toolbar is directly to the left of the screen workspace. It
contains commonly used objects that are placed onto screens.
Icon Name Description
Line Draws a simple line on screen
Rectangle Draws a simple rectangle or square on screen
Ellipse Draws an ellipse or circle on screen
Bit Lamp Displays one of two states depending upon the current
state (On or Off) of the tagged bit or PLC coil. The states
can be a graphic image from the MAPware-7000 graphic
libraries or an imported image.
Set Bit Places a button on screen that, when pressed, sets a
coil/bit in a PLC or internal memory
Reset Bit Places a button on screen that, when pressed, resets or
clears a coil/bit in a PLC or internal memory
Go to Screen Places a button on screen that, when pressed, displays a
base screen
Multilingual Text Use to create a static text object on screen with Windows
TrueType fonts