Maple Systems MAPware-7000 - Manual (Page 210)

210 MAPware-7000 Programming Manual
1010-1040, Rev. 02

Shift Value to Left: Shifts value one digit to the left (same as multiplying by 10).

Move Cursor to Left: Shifts focus cursor one digit to the right.

Move Cursor to Right: Shifts focus cursor one digit to the right.

Sign Key (+/-): Toggles signed value.

Sign Key (+/-) and 0: Toggles signed value, and then enters 0.

Numeric keys 0-9 and A-F: Enters designated digit.

Edit Bit On: Changes Bit Entry value to 1.

Edit Bit Off: Changes Bit Entry value to 0.

Acknowledge Alarm: Acknowledges the top-most alarm displayed.

Acknowledge All Alarms: Acknowledges all currently active alarms.

Previous Alarms: Move all alarms down one line in the list of alarms.

Next Alarm: Move all alarms up one line in the list of alarms.

Previous Historical Alarm: Move all alarms down one line in the list of historic alarms.

Next Historical Alarm: Move all alarms up one line in the list of historic alarms.

Refresh All Trends: The Historical Trend graph is updated when this task is executed.

Start Logger for all Groups: Begins logging data as specified in Data Logger for all groups.

Stop Logger for all Groups: Discontinues logging data as specified in Data Logger for all
groups.

Start Logger of Group #: Begins logging data as specified by Data Logger group number.

Stop Logger of Group #: Discontinues logging data as specified by Data Logger group
number.

Clear Log Memory: Clears all data collected in HMC memory by the Data Logger.

Move to Latest Historical Alarm: Move to the last recorded alarm in the list of historic
alarms.

Move to Oldest Historical Alarm: Move to the oldest recorded alarm in the list of historic
alarms.

Move to latest Alarm: Move to the last recorded alarm in the list of active alarms.

Move to oldest Alarm: Move to the oldest recorded alarm in the list of active alarms.

Start Printing of Group #: Begins printout of data as specified by Data Logger group
number.

Stop Printing of Group #: Discontinues printout of data as specified by Data Logger
group number.

Clear Historical Alarm Memory: Clears out all alarms listed in the Historic Alarm list.
Print Data
Description: Prints the displayed screen (to a connected serial printer).