Maple Systems MAPware-7000 - Manual (Page 334)

334 MAPware-7000 Programming Manual
1010-1040, Rev. 02

Firmware Erase button – this displays the following screen and provides you with the
option of erasing the firmware in the HMC7000:
Why would you want to erase the firmware? Normally, there is no reason to perform
this step. If a firmware upgrade is issued, you can easily download the upgrade using
the MAPware-7000 software without erasing the existing firmware. However, if
something unusual happens, causing the firmware to become corrupted, then this step
would allow you to erase the firmware. To continue to operate the HMC, you must then
download the latest firmware.

Battery Status button – this is a simple screen that measures the voltage of the battery
and reports status.

Beeper Setting button – use this screen to adjust the default settings for the internal
buzzer in the HMC.
Press the three buttons on the left side to turn on/off the beeper. The top button
controls the overall sound of the beeper. The Valid Key button enables/disables the
beeper when a valid touchscreen press occurs. The Invalid Key button enables/disables
the beeper when the operator touches an area of the touchscreen that has no
operation. On the right side, of the screen is a ‘test area’ in which you can press the
valid and invalid buttons to validate the settings.