Maple Systems MAPware-7000 - Manual (Page 331)

MAPware-7000 Programming Manual 331
1010-1040, Rev. 02

Display Result button – displays the results of the tests on the HMC screen:

Result to USB Stick button – this will copy the test results to a USB flash drive that is
inserted into the USB host port as a text file (FHWT.TXT).
System Setup Mode
The System Setup Mode provides information about the HMC7000 hardware (i.e. firmware
revision, serial port settings, etc.). It configures basic hardware settings of the HMC7000 such as
enabling the beeper, setting the screensaver timeout, and calibrating the touchscreen. System
Setup also allows you to erase all retentive memory in the HMC, the application project, and
even the firmware. Therefore, we strongly recommend that only qualified personnel access and
use the System Setup Mode.
The following is a list of activities available in the System Setup Mode:

Touchscreen calibration

Real Time Clock setting

Serial Port settings

Screen Saver timeout

Battery status

Beeper settings

Erase Firmware

Erase Application (Project)

Erase Retentive Memory

General System Information