Maple Systems MAPware-7000 - Manual (Page 4)

iv MAPware-7000 Programming Manual
1010-1040, Rev. 02
Safety Precautions
Intended Audience
A Qualified Person is one that has the skills and knowledge relating to the construction, installation,
operation, and maintenance of the electrical equipment and has received safety training on the hazards
involved. Qualified Personnel shall:

Have carefully read the entire operation manual.

Be trained and authorized to safely energize, de-energize, ground, lockout and tag circuits and
equipment, and clear faults in accordance with established safety practices.

Be trained in the proper care and use of protective equipment such as safety shoes, rubber
gloves, hard hats, safety glasses, face shields, flash clothing, etc., in accordance with established
safety practices.
 Be trained in rendering first aid.
Purpose and scope of this manual
Thank you for purchasing the HMC7000 Series product from Maple Systems. These products are
configured using the MAPware-7000 software.
This manual provides information on how to safely install, operate, and maintain your product.
Read the manual completely before installing, operating, or performing maintenance on this equipment.
This manual and the accompanying drawings should be considered a permanent part of the equipment
and should be readily available for reference and review.
Maple Systems reserves the right, without prior notice, to update information, make product changes, or
to discontinue any product or service identified in this publication
General Precautions
The user must operate the product according to the performance specifications described in the
operational manual.
• The HMC7000 models are general-purpose products. It is a system component and is used in
conjunction with other items of industrial equipment such as PLCs, Loop Controllers, Adjustable Speed
Drives, etc.
• A detailed system analysis and job safety analysis should be performed by the systems designer or
systems integrator before including the unit in any new or existing system. Contact Maple Systems for
options availability and for application-specific system integration information if required.