Maple Systems MAPware-7000 - Manual (Page 293)

MAPware-7000 Programming Manual 293
1010-1040, Rev. 02
The computer serial port must be able to support the settings listed above
(115.2K baud, No Parity, 8 Data bits, and 1 Stop Bit).
Importing Ladder Logic Blocks from another project
MAPware-7000 has a nice feature that allows you to import ladder logic blocks that were
created in another project. Of course, you can do this by simply copying another project but this
feature allows you to import only the ladder logic blocks that you wish without any of the other
project data.
Open the project that you wish to bring the imported logic blocks into, and then perform the
following steps:

On the standard menu, click Block…Import