Maple Systems MAPware-7000 - Manual (Page 291)

MAPware-7000 Programming Manual 291
1010-1040, Rev. 02
g. Bit Lamp object: Tag Address of B1 (Timer Set)
13. Save the Project. Compile the project. Download the project to the target HMC (make
sure that both Application and Ladder are selected).
Note: Simulation of Logic Blocks is not available in offline simulation mode.
When Screen #1 appears on the HMC7000, click on the Toggle button to activate the ten second
timer. You will see the timer increment in 10 msec intervals until 10 seconds has passed. Then
lamp B1 will light.
Other Useful Ladder Logic Tools
Downloading the Ladder Logic
After saving and compiling, (make sure no errors occur), you can download the project into your
HMC7000:

Click Project…Transfer…Download to display the Download menu:

Make sure that Project…Ladder is checked. Click the Download button to begin the
download to the HMC7000 unit.