Maple Systems MAPware-7000 - Manual (Page 36)

36 MAPware-7000 Programming Manual
1010-1040, Rev. 02

Center Along – when two or more objects are highlighted, this feature moves the
objects to the same location on the screen
o Screen’s Horizontal – aligns along the horizontal center of the screen
o Screen’s Vertical – aligns along the vertical center of the screen
o Object’s Horizontal – aligns with respect to the horizontal center of the two
objects
o Object’s Vertical – aligns with respect to the vertical center of the two objects

Place Equidistant – takes three or more highlighted objects and places them equidistant
from each other along…
o Along Horizontal – the horizontal plane
o Along Vertical – the vertical plane

Make Equal - takes two or more highlighted objects and makes them all the same size.
Note: the height/width of the last selected object is used for the adjustment.
o Height – affects only the height of each highlighted object
o Width – affects only the width of each highlighted object
o Size – both width and height are adjusted
Screen menu – options on creating/deleting screens in the project. Note: this menu only
appears if a current screen, keypad, or template is shown.

New Base Screen – creates a new base (full-sized) screen

New Popup Screen – creates a new popup (partially sized) screen

New Template Screen – create a new template screen

Open Screen – displays the Open Screen dialog box from which you can select which
screen you would like displayed

Open Template Screen - displays the Open Template Screen dialog box from which you
can select which template screen you would like displayed

Apply Template Screens – displays the Template Screen Setting dialog box which is used
to assign any of the template screens to each base screen

Close – closes the displayed screen

Delete – deletes the displayed screen

Duplicate –duplicates the currently displayed base screen or template

First – displays the first screen (Screen 1) or first template (Template 1)

Next – displays the next screen in sequence

Previous – displays the prior screen in sequence

Last – displays the last (highest numbered) screen
Define menu – use this menu to configure many of the background tasks of the HMC7000

Data Logger – displays the Data Logger screen. The Data Logger captures values from
predefined tags. Capturing is based upon a time interval or a triggered event. Capture
values are represented on the HMC7000 screen using the Historical Trend Object or
values are uploaded to a computer. Note: same as clicking on the Data Logger folder in
the Project Information window.

Global Keys – displays the Global Keys configuration screen. Global Keys determine how
the function keys on the right side of the display function when pressed. These keys can
also be configured locally per screen using the Keys folder under each Screen folder in