Chapter 1 – introduction, Welcome – Maple Systems MAPware-7000 User Manual
Page 17
MAPware-7000 Programming Manual
17
1010-1040, Rev. 02
Chapter 1 – Introduction
Welcome
Welcome to the Maple Systems’ HMC7000 Series Human Machine Controllers (HMCs). The
graphic HMC7000 is a combination operator-based HMI (human machine interface) with built-in
PLC (programmable logic controller) operation.
This is accomplished by using optional expansion I/O modules and configuration software that
supports ladder logic programming. Now you can have an HMI and a PLC in one unit. There are
several advantages:
Lower cost
Easier to use and maintain
Easier to program (only one software package to learn)
Faster response time since HMI and PLC are in one unit
The HMC7000 offers flexibility as well. Rather than using fixed I/O, the HMC7000 Series
employs expansion slots so that you can customize your I/O configuration. In addition, Maple
Systems offers a wide assortment of expansion modules including combination digital
input/output modules, digital input only, digital output only, analog modules, and high-speed
counter modules. The HMC7000 Series also has serial ports so if you have a favorite PLC that
you wish to use- no problem. The HMC7000 supports most major PLC manufacturer brands.
The HMC7000 Series products are industrial grade equipment. They are certified to meet the
European CE noise immunity/emission standards and they are UL listed for Class I Division 2
environments.
Please read this operation manual and vi
for the latest information
on these products.